1,000 hp in the quarter mile at 2,200–4,600 lb
How Fast Is 1,000 Horsepower?
With 1,000 hp a 3,500 lb car should run roughly 8.84 seconds at 154.1 mph through the quarter mile. Change the weight below to see how your own car stacks up.
- 1/8-mile ET
- 5.67 sec
- 1/8-mile speed
- 123.3 mph
- Trap speed
- 248.0 km/h
- Weight per hp
- 3.50 lb/hp
- Conservative ET (Huntington)
- 9.55 sec
- Conservative trap (Huntington)
- 147.5 mph
1,000 hp quarter-mile times by weight
| Race weight | 1/4 mile ET | Trap speed | 0–60 (RWD) | lb per hp |
|---|---|---|---|---|
| 2,200 lb | 7.58 s | 179.9 mph | 1.43 s | 2.20 |
| 2,600 lb | 8.01 s | 170.2 mph | 1.63 s | 2.60 |
| 3,000 lb | 8.40 s | 162.2 mph | 1.83 s | 3.00 |
| 3,400 lb | 8.76 s | 155.6 mph | 2.02 s | 3.40 |
| 3,800 lb | 9.09 s | 150.0 mph | 2.21 s | 3.80 |
| 4,200 lb | 9.40 s | 145.0 mph | 2.40 s | 4.20 |
| 4,600 lb | 9.69 s | 140.7 mph | 2.58 s | 4.60 |
1,000 hp is dedicated drag-racing power: the realm of extreme builds where traction and a safe chassis, not power, are the limits. These numbers come from the ideal-traction formula, so treat the quicker end of each range as a best case.
The estimate uses the widely published Patrick Hale equations: ET = 5.825 × (weight ÷ hp)1/3 and MPH = 234 × (hp ÷ weight)1/3, with weight in pounds and hp measured at the crank. They are documented, along with the more conservative Huntington (6.290 / 224) and Fox constants, in Stealth316’s horsepower / ET / MPH calculator notes. See the full formulas and sources page.
What weight does 1,000 hp need to run a certain ET?
| Target ET | Max weight at 1,000 hp | Trap speed |
|---|---|---|
| 14.00 s | 13,883 lb | 97.4 mph |
| 13.00 s | 11,116 lb | 104.9 mph |
| 12.00 s | 8,743 lb | 113.6 mph |
| 11.00 s | 6,734 lb | 123.9 mph |
| 10.00 s | 5,060 lb | 136.3 mph |
| 9.00 s | 3,688 lb | 151.5 mph |
For example, 1,000 hp is enough to run a 12.00 second quarter in a car up to 8,743 lb, and a 10.00 second pass at 5,060 lb or lighter.
1,000 hp compared with 950 and 1,050 hp
At 3,500 lb, going from 950 to 1,000 hp saves 0.15 s, and going on to 1,050 hp saves a further 0.14 s. Gains shrink as power rises because ET follows a cube root, so the same 50 hp is worth less each time. At 1,000 hp, the 1/8-mile ET for 3,500 lb is about 5.67 s at 123.3 mph.
The power-to-weight of a 3,500 lb car with 1,000 hp is 3.50 lb per hp, or 630 hp per tonne. See all horsepower comparisons.
Frequently asked questions
How fast is 1,000 hp in the quarter mile?
A 3,500 lb car with 1,000 crank hp is estimated at 8.84 s at 154.1 mph. Lighter cars are quicker, heavier ones slower.
How fast is 1,000 hp from 0 to 60?
At 3,500 lb a rear-wheel-drive car estimates about 2.07 s, all-wheel drive about 1.91 s.
Is 1,000 wheel hp the same as 1,000 hp?
No. If 1,000 is wheel horsepower, the crank figure is higher, about 1,176 hp on a rear-wheel-drive car. Use the WHP to HP converter.
Related calculators
QuarterMile Pro
$9 one-time
- No ads, ever
- Saved runs and your garage
- CSV export of every estimate
- Embeddable calculator widget for your site
Placeholder only: Pro is not on sale yet, and there is nothing to buy or sign up for. Every calculator here stays free.
Not available yet